Handla enkelt med delbetalning,
faktura eller kortbetalning
Allt du handlar i webshoppen
eller i butiken får du bonus på.
Nordens största hobbybutik.
Över 120000 st artiklar i lager
Standard frakt 29 kr
inom Sverige med DHL.
lagerHammer 1/10 SCT Sensor Br, Novak

Artikelnr M-NOV1855

Hammer 1/10 SCT Sensor Br

1425 kr

Standard frakt  (29 kr inom Sverige)

Om du vill kan du dela upp betalningen.

176 kr/mån

12 månader. Inklusive uppläggning, avi och betavgifter.

Extreme 1/10th Scale Fun at an Affordable PriceNovak’s Hammer ESC offers 100% pure, sensor-based control and precision driving to enthusiasts looking for an affordable, incredibly smooth-driving power upgrade for their 2WD 10th scale off-road short-course truck, 4WD or 2WD off-road buggy, and even power-hungry on-road cars. The ESC is 2S and 3S LiPo capable, is pre-wired from the factory and includes gold-plated bullet connectors for easy installation!Novak´s Hammer controller is based on Novak’s proven 1/10th scale ESC design. Drivers new to the Novak platform will experience a much more connected feel to their vehicle with strong braking control. The sensor-based design is key, and it is no surprise this is the standard in the racing world. Compared to a sensorless controller, it has controlled responses under load, with no cogging or hesitation. The Hammer is factory-defaulted to LiPo mode with reverse turned on. Drivers can customize the Hammer firmware to suit their driving style, including Throttle Curve, Brake Power and many other parameters. No clumsy or complicated programming device needed – the Hammer is fully programmable with a press of a button!Fun in the ElementsBig power means lots of fun, and often fun in all conditions. Designed with a silicone-gasketed sealed case, the Hammer is protected from just about anything you run it through. Its extreme resistance to water, dirt, and other debris gives users confidence while running through the occasional jaunt through the water.Added ProtectionNovak has been designing and building sensor-based controllers since 2002, longer than any other company in the industry. Circuitry protection has always been at core of the design. The Hammer firmware includes thermal overload protection, low-voltage protection, and motor lock-up protection for added reliability. Additionally, on-board diagnostics are standard in the firmware including a motor sensor checking test, error sensing, and on-board temperature diagnostics.Specs:Motor Type    Sensored Brushless (2 and 4-pole)Fwd/Brk/Rev    F / B / RInput Cells (LiPo/Ni-MH)    2S and 3S LiPo/LiFe or 4-9 NiMHDimensions (in/mm)    1.4" x 2.0" (35 x 51 mm)Height (in/mm)    0.9" (24 mm)Weight (oz/g)    1.4 oz. (40 g)On-Resistance (ohms)    0.00060 ohms @ 25°C trans. temp.BEC (volts / amps)    6.0 volts DC / 3.0 ampsWire Size:Motor: 13G Super-Flex Copper-Strand Silicone Wire, factory-installed with 4mm female gold-plated bullet motor connectors (black with color-coded heat shrink: blue, yellow, orange)Battery: 14G Super-Flex Copper-Strand Silicone Wire, factory-installed (red/black)Status LEDs    5, multi-coloredMotor Limits:2S: 4,500Kv (4-pole) or lower; 8.5T (2-pole) or higher sensored3S**: 3,900Kv (4-pole) or lower; 10.5T (2-pole) or higher sensored*For 3S applications, an external BEC module such as Novak´s #5463 3-Amp High-Voltage Universal BEC is recommended.**Vehicles under 4lbs recommended for 3S. Vehicles over 4lbs require operation on 2S or lower Kv motor.