X3L Basic Kit (385L)Main blade grip lever adopts a three-hole design, making it easy to adjust the main rotor head ratio for different flight characteristics.Suitable for 6S 1000~1800 mAh LiPo Battery & HK 2520 / 3226 Brushless Motor.Tail drive design is the same as on the X7, reducing transmission structural components, increasing efficiency and ease of maintenance dramatically.New stylishly painted fiberglass canopy design.Content:X3L Basic Kit (385L)Tail Rotor Blade Set (62 mm)Specifications:Overall Length (with Canopy): 709 mmMain Rotor Diameter: 808 mm (Main Blades 360 mm) or 858 mm (Main Blades 385 mm)Main Blade Length: 360~385 mmOverall Height: 212 mmOverall Width: 87.8 mmTail Blade Length: 62 mmTail Rotator Diameter: 164 mmESC: Minimum 50A HeliLiPo Battery: 1300~1800 mAhBL Motor: 2520 / 3226Total weight: 515 g ±3% (kit with canopy, w/o all electronics, blades and batteries)Required For Operation:Transmitter (6-channel or more - helicopter system)Receiver (6-channel or more)3x CCPM Servo (#0S2311) / 1x Tail Servo (#0S2518)LiPo Battery: 3S & 6SESC: 50A+ ESC recommended (#0F1050)CF main blades (360~385 mm)Flybarless System12~13T Pinion GearBL Motor: 2520 (#852205) / 3226 (#0M1505)Tools and Equipment for Assembly (Not included):1.5 mm Hexagon Screw Driver2 mm Hexagon Screw Driver2.5 mm Hexagon Screw DriverPhilips Screw DriverLubricant / one-way bearing greaseSpring calipers, Needle-nosed pliersGeneral thread lockThe available pinions for X3 are as follows (12T~13T) with drive gear ratio below:12T = 10.91 : 1 : 5.4613T = 10.07 : 1 : 5.46
minicars
